This is part 5 of my IoT series of blogs. So far we did look at the following topic Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor Putting the Smart into the Smart IoT Device Setting up an “all in one” demo environment This post will … Read moreImplementation of SmartGateway for IoT Demo
If you have followed my earlier posts, then you know, that I’m in the process of building an IoT Demo, with a Raspberry Pi2 as the Smart Gateway. During this process, I had to re-install my Raspberry multiple times, but after the second time I got a bit tired of doing the same steps over … Read moreBuilding the IoT Smart Gateway with Docker, Raspberry Pi and JBoss for the “lazy” ones – Ansible rules!
This is part 4 in my IoT series of blogs. The first parts did cover the following topics: Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor This blog will describe how to enable the Smart Gateway to handle, enhance and forward incoming messages. As for … Read morePutting the Smart into the Smart IoT Device
This is part 3 in my IoT series of blogs. The first parts did cover the following topics Introduction into the planned scenario Building a Rasperry Pi based Smart Gateway In this article I will describe how I build my first physical sensor, based on an ESP8266 microprocessor and a DHT22 digital temperature and humidity sensor. … Read moreESP8266 and DHT22 based smart sensor
As described in my previous post, my intention is to create a new version of my IoT Demo. The first element that I wanted to get up and running is the Gateway, which is supposed to run a MQTT broker to receive and forward messages a transformation capability to change messages, enable smart routing of … Read moreBuilding a Raspberry Pi based Smart Gateway for IoT
After having done a pure Docker/JBoss based IoT Demo-Environment I felt like it was time to bring this demo to the next level, but what does that mean? For me it means to become a bit more “realistic” and to integrate more and different technologies into the demo. In hard facts, this mean real, “dumb” … Read moreRed Hat IoT Demo – Next Generation
Since mid of December 2015, Red Hat has released the initial version of the Fuse Integration Services. These are various pre-build images which are aimed to make the implementation of Red Hat JBoss Fuse applications on OpenShift V3 as seamless as possible. In this blog I will document the steps required to create a first … Read moreFirst Fuse application on OpenShift V3.1