This blog will cover my first experiments with an Intel Edison, a small Computer-on-Module, which Intel was so kind to give to me! Thanks again for this guys! There are many websites explaining how to setup your development computer to work with an Intel Edison, like Intels own website. So I will assume you have followed […]
Category: IoT
This is part 5 of my IoT series of blogs. So far we did look at the following topic Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor Putting the Smart into the Smart IoT Device Setting up an “all in one” demo environment This post will […]
If you have followed my earlier posts, then you know, that I’m in the process of building an IoT Demo, with a Raspberry Pi2 as the Smart Gateway. During this process, I had to re-install my Raspberry multiple times, but after the second time I got a bit tired of doing the same steps over […]
This is part 4 in my IoT series of blogs. The first parts did cover the following topics: Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor This blog will describe how to enable the Smart Gateway to handle, enhance and forward incoming messages. As for […]
This is part 3 in my IoT series of blogs. The first parts did cover the following topics Introduction into the planned scenario Building a Rasperry Pi based Smart Gateway In this article I will describe how I build my first physical sensor, based on an ESP8266 microprocessor and a DHT22 digital temperature and humidity sensor. […]
As described in my previous post, my intention is to create a new version of my IoT Demo. The first element that I wanted to get up and running is the Gateway, which is supposed to run a MQTT broker to receive and forward messages a transformation capability to change messages, enable smart routing of […]