Implementation of SmartGateway for IoT Demo

This is part 5 of my IoT series of blogs. So far we did look at the following topic Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor Putting the Smart into the Smart IoT Device Setting up an “all in one” demo environment This post will […]

All in One IoT Demo with JBoss Fuse, BPM Suite and BRMS

This is part 5 of my IoT series of blogs. So far we did look at the following topic Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor Putting the Smart into the Smart IoT Device In this blog we will create a first running version of […]

Building the IoT Smart Gateway with Docker, Raspberry Pi and JBoss for the “lazy” ones – Ansible rules!

If you have followed my earlier posts, then you know, that I’m in the process of building an IoT Demo, with a Raspberry Pi2  as the Smart Gateway. During this process, I had to re-install my Raspberry multiple times, but after the second time I got a bit tired of doing the same steps over […]

Putting the Smart into the Smart IoT Device

This is part 4 in my IoT series of blogs. The first parts did cover the following topics: Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor This blog will describe how to enable the Smart Gateway to handle, enhance and forward incoming messages. As for […]

First Fuse application on OpenShift V3.1

Since mid of December 2015, Red Hat has released the initial version of the Fuse Integration Services. These are various pre-build images which are aimed to make the implementation of Red Hat JBoss Fuse applications on OpenShift V3 as seamless as possible. In this blog I will document the steps required to create a first […]

Pushing an external and not yet published Docker image into Red Hat OpenShift V3

If you should have followed my previous postings ( thanks for that!! ), then you should have read my blog IMPORTING AN EXTERNAL AND NOT YET PUBLISHED DOCKER IMAGE INTO RED HAT OPENSHIFT V3, in which I have explained how to manually carry a Docker image from a non OpenShift build-server to our OpenShift infrastructure. This […]

Installing vagrant landrush plugin on Mac OSX ‘El Capitan’ with homebrew

I tried to install the vagrant landrush plugin today, but received the following error from vagrant plugin install landrush 17:38 $ vagrant plugin install landrush Installing the ‘landrush’ plugin. This can take a few minutes… Bundler, the underlying system Vagrant uses to install plugins, reported an error. The error is shown below. These errors are […]

IaaS & PaaS, aren’t they the same? Part 1

During the last year of my customer meetings I have very often been addressed with the same scenario, which is comparing traditional ways of doing stuff ( also known as Mode 1 IT ) with more dynamic, up to date and cloud ready “Mode 2” approaches. To be more precise, I have had many discussions […]

close

Subscribe to our newsletter.

Please select all the ways you would like to hear from Open Sourcerers:

You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website.

We use Mailchimp as our newsletter platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.