This is part 5 of my IoT series of blogs. So far we did look at the following topic Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor Putting the Smart into the Smart IoT Device Setting up an „all in one“ demo environment This post will … Weiterlesen Implementation of SmartGateway for IoT Demo
If you have followed my earlier posts, then you know, that I’m in the process of building an IoT Demo, with a Raspberry Pi2 as the Smart Gateway. During this process, I had to re-install my Raspberry multiple times, but after the second time I got a bit tired of doing the same steps over … Weiterlesen Building the IoT Smart Gateway with Docker, Raspberry Pi and JBoss for the „lazy“ ones – Ansible rules!
This is part 4 in my IoT series of blogs. The first parts did cover the following topics: Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor This blog will describe how to enable the Smart Gateway to handle, enhance and forward incoming messages. As for … Weiterlesen Putting the Smart into the Smart IoT Device
After having done a pure Docker/JBoss based IoT Demo-Environment I felt like it was time to bring this demo to the next level, but what does that mean? For me it means to become a bit more „realistic“ and to integrate more and different technologies into the demo. In hard facts, this mean real, „dumb“ … Weiterlesen Red Hat IoT Demo – Next Generation