Receiving and Storing Sensor Data with Google Cloud Dataflow and Cloud Storage

This blog continues the blogs: Mongoose a new way to program ESP8266 Preparing Google Cloud IoT Core to Receive Messages Let’s talk to Google Cloud IoT Core In the previous blog we connected our ESP to Google Cloud IoT Core, now it’s time to actually do something with the data provided by our sensor. In […]

Let’s talk to Google Cloud IoT Core

This blog continues the blogs: Mongoose a new way to program ESP8266 Preparing Google Cloud IoT Core to Receive Messages and will cover how to change the ESP8266 Code for the sensor to be able to communicate with Google Cloud IoT Core. Connecting the ESP to your computer If you have disconnected your ESP from […]

Preparing Google Cloud IoT Core to Receive Messages

In this blog we will connect the Mongoose OS based ESP8266 with Google Cloud IoT Core and Google Cloud Pub/Sub, which we will be using for it’s MQTT Broker capability. We will not cover the basics of handling and navigating in Google Cloud Console, if you are new to it, please do look at the learning […]

Mongoose a new way to program ESP8266

In previous blogs, I have used Arduine-IDE to develop code for the ESP8266. It was a nice and convenient way, suitable for me with a background in development. Recently I came across a new technology, that I wanted to give a try: Mongoose OS Similar to my previous setup, I will be using a NodeMCU […]

Putting the Smart into the Smart IoT Device

This is part 4 in my IoT series of blogs. The first parts did cover the following topics: Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor This blog will describe how to enable the Smart Gateway to handle, enhance and forward incoming messages. As for […]

ESP8266 and DHT22 based smart sensor

This is part 3 in my IoT series of blogs. The first parts did cover the following topics Introduction into the planned scenario Building a Rasperry Pi based Smart Gateway In this article I will describe how I build my first physical sensor, based on an ESP8266 microprocessor and a DHT22 digital temperature and humidity sensor. […]

close

Subscribe to our newsletter.

Please select all the ways you would like to hear from Open Sourcerers:

You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website.

We use Mailchimp as our newsletter platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.