This walk-through example will encourage you to build an Apache Camel application from scratch, deploy it in a Kubernetes environment, gather metrics using Prometheus and display them in Grafana. Monitoring will automatically adjust when the system scales up or down. Table of Contents Introduction About Prometheus To-Do overview Scraping data The application Enabling Prometheus Enabling […]
Category: JBoss Fuse
This is part 5 of my IoT series of blogs. So far we did look at the following topic Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor Putting the Smart into the Smart IoT Device Setting up an “all in one” demo environment This post will […]
If you have followed my earlier posts, then you know, that I’m in the process of building an IoT Demo, with a Raspberry Pi2 as the Smart Gateway. During this process, I had to re-install my Raspberry multiple times, but after the second time I got a bit tired of doing the same steps over […]
This is part 4 in my IoT series of blogs. The first parts did cover the following topics: Introduction into the planned scenario Building a Raspberry Pi based Smart Gateway ESP8266 and DHT22 based smart sensor This blog will describe how to enable the Smart Gateway to handle, enhance and forward incoming messages. As for […]
This is part 3 in my IoT series of blogs. The first parts did cover the following topics Introduction into the planned scenario Building a Rasperry Pi based Smart Gateway In this article I will describe how I build my first physical sensor, based on an ESP8266 microprocessor and a DHT22 digital temperature and humidity sensor. […]
After having done a pure Docker/JBoss based IoT Demo-Environment I felt like it was time to bring this demo to the next level, but what does that mean? For me it means to become a bit more “realistic” and to integrate more and different technologies into the demo. In hard facts, this mean real, “dumb” […]
Since mid of December 2015, Red Hat has released the initial version of the Fuse Integration Services. These are various pre-build images which are aimed to make the implementation of Red Hat JBoss Fuse applications on OpenShift V3 as seamless as possible. In this blog I will document the steps required to create a first […]